|
|
K.D. Solid Ponderosa Pine "C" and Better Selects Length as Available 6' - 16' |
Production |
Description |
| 1/2 X 8 |
1/2 X 7 1/4 |
| 1/2 X 10 |
1/2 X 9 1/4 |
| 1/2 x 12 |
1/2 x 11 1/4 |
| 1 X 4 |
3/4 x 3 1/2 |
| 1 x 6 |
3/4 x 5 1/2 |
| 1 x 8 |
3/4 x 5 1/2 |
| 1 x 8 |
3/4 x 7 1/4 |
| 1 x 10 |
3/4 x 9 1/4 |
| 1 x 12 |
3/4 x 11 1/4 |
| 5/4 x 6 |
1 1/8 x 5 1/2 |
| 5/4 x 8 |
1 1/8 x 7 1/2 |
| 5/4 x 10 |
1 1/8 x 9 1/4 |
| 5/4 x 12 |
1 1/8 x 11 1/4 |
Grading Rules*
C SELECT |
Lumber of this grade is recommended for all finishing uses where fine appearance is essential. Because its appearance and usability ranks only slightly less than B & Btr. - 1 & 2 Clear, it is one of the most sought after products from the clear portion of the log. It is widely used for high quality interior trim and cabinet work with natural, stain or enamel finishes.
Characteristics and limiting provisions are:
Checks - Small, well scattered seasoning checks on the surface.
Skip - Light skip on one edge, one medium or two light skips on the back.
Stain - Medium stained wood in an occasional piece covering 1/3 the face, or a greater area of lighter stain when not in combinaition with other characteristics.
Torn or Raised Grain - Very light.
Wane - On reverse side 1/2 the thickness, 1/8 the width, 1/4 the length in an occasional piece.
Cup - Very light.
Twist - 7/4 and thinner, 1/2 of very light. 8/4 and thicker, 1/4 of very light.
Any one of the following characteristics:
Knots - Two small, sound, tight knots.
Pitch Streak - One small pitch streak.
Pockets - Two very small pockets.
Equivalent characteristics no more damaging than any of the above. |
|
